Endpoint Central Build Number: -

Eligible Build Numbers: 10.0.0 and above.

Customers using builds 10.0.00 and above can install this Service Pack. Customers using builds less than 10.0.00 will have to refer to Service Packs page for upgrading to -.

Download Hotfix Download EndpointCentral.exe

* - For older versions, visit this page.

Read and accept the License Agreement before downloading this software.

The SHA256 checksum

  • Hash value
  • -

Applicable only for hotfix

More Download Options  
Mirror Download 64 bit.exe

Instructions to Apply Service Packs/Hot Fixes

Note: To reach the latest version, if you have to install a couple of service packs and hotfixes, it is recommended to exit the Update Manager tool for every PPM installation.

  1. Shut down Endpoint Central. (either through Start --> Programs --> ManageEngine Endpoint Central --> Stop Endpoint Central or Right click Endpoint Central logo on the Notification area of Task bar and click Shut down Server)
  2. Important:
    • Take a backup of the Endpoint Central installation directory (<Install_Dir>/DesktopCentral_Server) to avoid any data loss during the upgrade process.
    • If you have installed Endpoint Central Server on Windows Vista, Windows 7, Windows 2008, Windows 8, or Windows 2012 you should login as a default administrator before running the Update Manager tool.
    • Ensure that either your Endpoint Central installation directory or the Endpoint Central Directory folder in the system on which the Endpoint Central database is running is not scanned by the anti virus.
    • If the Endpoint Central Service is being monitored by a 3rd party tool or a script that will restart the service, ensure that you disable it until you complete the upgrade process.
  3. Execute the UpdateManager.bat file present in the <Endpoint Central_Home>/bin directory.
  4. Click "Browse" and select the.ppm file that you have downloaded.
  5. Click "Install" to install the service pack. This may take few minutes depending on the amount of data that needs to be migrated.
  6. Wait until the service pack / hotfix is fully installed.
    Note: To reach the latest version, if you have to install a couple of service packs and hotfixes, it is recommended to exit the Update Manager tool for every PPM installation.
  7. Click "Close" and then click "Exit" to exit the Update Manager tool.
  8. Start the Endpoint Central.

Endpoint Central MSP Build Number: -

Eligible Build Numbers: 10.0.0 and above.

Customers using builds 10.0.00 and above can install this service pack. Customers using builds less than 10.0.00 will have to refer to Service Packs page for upgrading to -.

Download Hotfix Download EndpointCentralMSP.exe

* - For older versions, visit this page.

Read and accept the License Agreement before downloading this software.

The SHA256 checksum

  • Hash value
  • -

Applicable only for hotfix

More Download Options  
Mirror Download 64 bit.exe

Instructions to Apply Service Packs/Hot Fixes

Note: To reach the latest version, if you have to install a couple of service packs and hotfixes, it is recommended to exit the Update Manager tool for every PPM installation.

  1. Shut down Endpoint Central MSP. (either through Start --> Programs --> ManageEngine Endpoint Central MSP --> Stop Endpoint Central MSP or Right click Endpoint Central MSP logo on the Notification area of Task bar and click Shut down Server)
  2. Important:
    • Take a backup of the Endpoint Central MSP installation directory (<Install_Dir>/DesktopCentral_Server) to avoid any data loss during the upgrade process.
    • If you have installed Endpoint Central MSP Server on Windows Vista, Windows 7, Windows 2008, Windows 8, or Windows 2012 you should login as a default administrator before running the Update Manager tool.
    • Ensure that either your Endpoint Central MSP installation directory or the Endpoint Central MSP Directory folder in the system on which the Endpoint Central MSP database is running is not scanned by the anti virus.
    • If the Endpoint Central MSP Service is being monitored by a 3rd party tool or a script that will restart the service, ensure that you disable it until you complete the upgrade process.
  3. Execute the UpdateManager.bat file present in the <Endpoint Central MSP_Home>/bin directory.
  4. Click "Browse" and select the.ppm file that you have downloaded.
  5. Click "Install" to install the service pack. This may take few minutes depending on the amount of data that needs to be migrated.
  6. Wait until the service pack / hotfix is fully installed.
    Note: To reach the latest version, if you have to install a couple of service packs and hotfixes, it is recommended to exit the Update Manager tool for every PPM installation.
  7. Click "Close" and then click "Exit" to exit the Update Manager tool.
  8. Start the Endpoint Central MSP.

Mobile Device Manager Plus Build Number: 10.1.2307.11

Eligible Build Numbers: 10.1.2006.12 and above.

Customers using builds 10.1.2006.12 and above can install this service pack. Customers using builds below 10.1.2006.12 will have to refer to Service Packs for upgrading to 10.1.2307.11   Latest Hotfix

Download Hotfix Download MobileDeviceManagerPlus.exe

** - To know the complete list of enhancements in this update, click here.

Read and accept the License Agreement before downloading this software.

SHA256 checksum hash value

  • 5616ed025d3c5cf85328e0347e50fd6e2dfbf9dfefbd34463e47fab2deb195ec

(Applicable only for hotfix)

More Download Options  
Mirror Download 32 bit.exe

Instructions to Apply Service Packs/Hot Fixes

NOTE: If you have to install intermediate service packs and hotfixes to install the latest version, it is recommended to exit the Update Manager after every PPM installation. Also, installing Service Packs doesn't affect the device enrollment/management or device-MDM server communication.

  1. Stop Mobile Device Manager Plus through Start --> Programs --> ManageEngine Mobile Device Manager Plus --> Stop Mobile Device Manager Plus
  2. Important:
    Take a backup of the Mobile Device Manager Plus installation directory (<Install_Dir>/MDMServer) to avoid any data loss during the upgrade process.
  3. Execute the UpdateManager.bat file present in the <MDMP_Home>/bin directory.
  4. Click 'Browse' and select the .ppm file you have downloaded.
  5. Click 'Install' to install the service pack/hotfix. This may take few minutes depending on the amount of data that needs to be migrated.
  6. Wait until the service pack/hotfix is fully installed.
    NOTE: If you have to install intermediate service packs and hotfixes to install the latest version, it is recommended to exit the Update Manager after every PPM installation
  7. Click 'Close' and then click 'Exit' to exit the Update Manager tool.
  8. Now start Mobile Device Manager Plus.

Mobile Device Manager Plus MSP Build Number: 10.1.2307.11

Eligible Build Numbers: 10.1.2006.12 and above.

Customers using builds 10.1.2006.12 and above can install this service pack. Customers using builds below 10.1.2006.12 will have to refer to Service Packs for upgrading to 10.1.2307.11   Latest Hotfix

Download HotfixDownload MobileDeviceManagerPlusMSP.exe

* - To know the complete list of enhancements in this update, click here.

Read and accept the License Agreement before downloading this software.

SHA256 checksum hash value 

  • 1e7311310285d7cc3b6af65b26e61f0ce35e13b9efeb4dde9fd240f124897fee

(Applicable only for hotfix)

More Download Options  
Mirror Download32 bit.exe

Instructions to Apply Service Packs/Hot Fixes

NOTE: If you have to install intermediate service packs and hotfixes to install the latest version, it is recommended to exit the Update Manager after every PPM installation. Also, installing Service Packs doesn't affect the device enrollment/management or device-MDM MSP server communication.

  1. Stop Mobile Device Manager Plus through Start --> Programs --> ManageEngine Mobile Device Manager Plus MSP --> Stop Mobile Device Manager Plus MSP
  2. Important:
    Take a backup of the Mobile Device Manager Plus MSP installation directory (<Install_Dir>/MDMMSPServer) to avoid any data loss during the upgrade process.
  3. Execute the UpdateManager.bat file present in the <MDMMSP_Home>/bin directory.
  4. Click 'Browse' and select the .ppm file you have downloaded.
  5. Click 'Install' to install the service pack/hotfix. This may take few minutes depending on the amount of data that needs to be migrated.
  6. Wait until the service pack/hotfix is fully installed.
    NOTE: If you have to install intermediate service packs and hotfixes to install the latest version, it is recommended to exit the Update Manager after every PPM installation
  7. Click 'Close' and then click 'Exit' to exit the Update Manager tool.
  8. Now start Mobile Device Manager Plus MSP.

OS Deployer Build Number: 10002

Eligible Build Numbers: 10001 and above.

Download Hotfix Download OSDeployer.exe

* - For older versions, visit this page.

Read and accept the License Agreement before downloading this software.

The SHA256 checksum hash value

  • 64-bit file
  • 597BB039A6F021BE1A95DA06E22E8F9ED639A37A6B39E5D337804A9A7EAC1B29
  • PPM file
  • 0EC0C11F4769C910DD3DCB213BE1564A64D455196EA90CDA930C1D8BC5A0D468
More Download Options  
Mirror Download 64 bit.exe

Instructions to Apply Service Packs/Hot Fixes

  1. Stop OS Deployer.
  2. Open services.msc --> Find ManageEngine OS Deployer Server --> Stop the service.
  3. Execute the UpdateManager.bat file present in the <OSDeployer_server>/bin directory.
  4. If you have installed OS Deployer Server on Windows Vista, Windows 7, Windows 2008, Windows 8, or Windows 2012, you should login as a default administrator before running the Update Manager tool.
  5. Click "Browse" and select the.ppm file that you have downloaded and install the file.
  6. This may take few minutes depending on the amount of data that needs to be migrated. Wait until the service pack / hotfix is fully installed.
  7. Close and exit the Update Manager tool.
  8. Start OS Deployer.

Patch Manager Plus Build Number: 11.3.2400.15

Eligible Build Numbers: 11.2.2300.01 and above.

Customers using builds 11.2.2300.01 and above can install this Service Pack. Customers using builds less than 11.2.2300.01 will have to refer to Service Packs page for upgrading to 11.3.2400.15

Download Hotfix Download PatchManagerPlus.exe

* - For older versions, visit this page.

Read and accept the License Agreement before downloading this software.

The SHA256 checksum

  • Hash value
  • f51f17a822ec21be14be769205269cf9dd562e4773ca3e4d2a871d827da343cd

(Applicable only for hotfix)

More Download Options  
Mirror Download 64 bit.exe

Instructions to Apply Service Packs/Hot Fixes

  1. Shut down Patch Manager Plus i.e. right click the Patch Manager Plus logo on the Notification area of Task bar and click on Stop service)
  2. Important:
    • Take a backup of the Patch Manager Plus installation directory (/PatchManagerPlus) to avoid any data loss during the upgrade process.
    • If you have installed Patch Manager Plus Server on Windows Vista, Windows 7, Windows 2008, Windows 8, Windows 2012 or Windows 2012 R2 you should login as a default administrator before running the Update Manager tool.
    • Ensure that either your Patch Manager Plus installation directory or the Patch Manager Plus Directory folder in the system on which the Patch Manager Plus database is running is not scanned by the anti virus.
    • If the Patch Manager Plus Service is being monitored by a 3rd party tool or a script that will restart the service, ensure that you disable it until you complete the upgrade process.
  3. Execute the UpdateManager.bat file present in the /PatchManagerPlus/bin directory.
  4. Click "Browse" and select the.ppm file that you have downloaded.
  5. Click "Install" to install the service pack. This may take few minutes depending on the amount of data that needs to be migrated.
  6. Wait until the service pack / hotfix is fully installed.
  7. Click "Close" and then click "Exit" to exit the Update Manager tool.
  8. Start the Patch Manager Plus.

Patch Connect Plus Build Number: 90129

Eligible Build Numbers: 90000 and above.

Download HotfixDownload PatchConnectPlus.exe

* - For older versions, visit this page.

Read and accept the License Agreement before downloading this software.

The SHA256 checksum hash value

  • c47244070c56bb70651df210759f92ab4146f0d112966f9ee11027e96084de72
More Download Options  
Mirror Download 64 bit.exe

Instructions to Apply Service Packs/Hot Fixes

  1. Shut down Patch Connect Plus. (Right click Patch Connect Plus logo on the Notification area of Task bar and click Shut down Server)
  2. Important:
    • Take a backup of the Patch Connect Plus installation directory (<Install_Dir>/PatchConnectPlus) to avoid any data loss during the upgrade process.
    • If you have installed Patch Connect Plus Server on Windows Vista, Windows 7, Windows 2008, Windows 8, Windows 2012 or Windows 2012 R2 you should login as a default administrator before running the Update Manager tool.
    • Ensure that either your Patch Connect Plus installation directory or the Patch Connect Plus Directory folder in the system on which the Patch Connect Plus database is running is not scanned by the anti virus.
    • If the Patch Connect Plus Service is being monitored by a 3rd party tool or a script that will restart the service, ensure that you disable it until you complete the upgrade process
  3. Execute the UpdateManager.bat file present in the <Install_Dir>/PatchConnectPlus/bin directory.
  4. Click "Browse" and select the.ppm file that you have downloaded.
  5. Click "Install" to install the service pack. This may take few minutes depending on the amount of data that needs to be migrated.
  6. Wait until the service pack / hotfix is fully installed.
  7. Click "Close" and then click "Exit" to exit the Update Manager tool.
  8. Start the Patch Connect Plus.

Remote Access Plus Build Number:11.3.2400.09

Download Hotfix Download RemoteAccessPlus.exe

* - For older versions, visit this page.

Read and accept the License Agreement before downloading this software.

SHA256 checksum hash value

  • SHA-256
  • 50d31984ccc916fc94f30e9fa77b7bb74f676cf9f0ba86a0d3684e98dc1fff96

Applicable only for hotfix

More Download Options  
Mirror Download 64 bit.exe

Instructions to Apply Service Packs/Hot Fixes

  1. Stop Remote Access Plus.
    Open services.msc --> Find ManageEngine Remote Access Plus Server --> Stop the service.
  2. Execute the UpdateManager.bat file present in the <remote access plus_home>/bin directory.
    If you have installed Remote Access Plus Server on Windows Vista, Windows 7, Windows 2008 Server, Windows 8, or Windows 2012 Server, you should login as a default administrator before running the Update Manager tool.
  3. Click "Browse" and select the '.ppm' file that you have downloaded and install the file.
    This may take few minutes depending on the amount of data that needs to be migrated. Wait until the service pack / hotfix is fully installed.
  4. Close and exit the Update Manager tool.
  5. Start Remote Access Plus.

Browser Security Plus Build Number: 11.2.2315.18

Eligible Build Numbers: 11.2.2300.3 and above.

Download Hotfix Download BrowserSecurityPlus.exe

* - For older versions, contact Browser Security Plus support.

Read and accept the License Agreement before downloading this software.

The SHA256 checksum hash value

  • PPM file
  • a2f740dd46a6563555bcb6ab8db0c5d693fc0e07a2efcc5bd9b1d06313233abc
More Download Options  
Mirror Download 64 bit.exe

Instructions to Apply Service Packs/Hot Fixes

  1. Stop Browser Security Plus through Start --> Services --> ManageEngine Browser Security Plus server --> Stop
  2. Important:
    Take a backup of the Browser Security Plus installation directory (<Install_Dir>/BrowserSecurityPlus) to avoid any data loss during the upgrade process.
  3. Execute the UpdateManager.bat file present in the <install_dir>/BrowserSecurityPlus/bin
  4. Click 'Browse' and select the .ppm file you have downloaded.
  5. Click 'Install' to install the service pack/hotfix. This may take few minutes depending on the amount of data that needs to be migrated.
  6. Wait until the service pack/hotfix is fully installed.
  7. Click 'Close' and then click 'Exit' to exit the Update Manager tool.
  8. Now start Browser Security Plus.

Vulnerability Manager Plus Build Number: 11.3.2406.08

Eligible Build Numbers: 11.3.2400.04 and above.

Customers using builds 11.3.2400.04 and above can install this Service Pack. Customers using builds less than 11.3.2400.04 will have to refer to Service Packs page for upgrading to 11.3.2406.08

Download Hotfix Download VulnerabilityManagerPlus.exe

Read and accept the License Agreement before downloading this software.

The SHA256 checksum hash value

  • PPM file
  • 18e337c44cfadc66bf43ac7eeacb964d50a2a6016c8578392512419b89e7db89
More Download Options  
Mirror Download 64 bit.exe

Instructions to Apply Service Packs/Hot Fixes

  1. Shut down Vulnerability Manager Plus i.e. right click the Vulnerability Manager Plus logo on the Notification area of Task bar and click on Stop service)
  2. Important:
    • Take a backup of the Vulnerability Manager Plus installation directory (/VulnerabilityManagerPlus) to avoid any data loss during the upgrade process.
    • If you have installed Vulnerability Manager Plus Server on Windows Vista, Windows 7, Windows 2008, Windows 8, Windows 2012 or Windows 2012 R2 you should login as a default administrator before running the Update Manager tool.
    • Ensure that either your Vulnerability Manager Plus installation directory or the Vulnerability Manager Plus Directory folder in the system on which the Vulnerability Manager Plus database is running is not scanned by the anti virus.
    • If the Vulnerability Manager Plus Service is being monitored by a 3rd party tool or a script that will restart the service, ensure that you disable it until you complete the upgrade process.
  3. Execute the UpdateManager.bat file present in the /VulnerabilityManagerPlus/bin directory.
  4. Click "Browse" and select the.ppm file that you have downloaded.
  5. Click "Install" to install the service pack. This may take few minutes depending on the amount of data that needs to be migrated.
  6. Wait until the service pack / hotfix is fully installed.
  7. Click "Close" and then click "Exit" to exit the Update Manager tool.
  8. Start the Vulnerability Manager Plus.

Device Control Plus Build Number: 11.3.2406.08

Download Hotfix Download DeviceControlPlus.exe

* - For older versions, visit this page.

Read and accept the License Agreement before downloading this software.

The SHA256 checksum

  • Hash value
  • 074c84c0d8e60f9196227c16d3a5acf08a7305ee654e1c60c4448a6981ea688e

(Applicable only for hotfix)

More Download Options  
Mirror Download64 bit.exe

Instructions to Apply Service Packs/Hot Fixes

  1. Shut down Device Control Plus i.e. right click the Device Control Plus logo on the Notification area of Task bar and click on Stop service
  2. Important:
    • Take a backup of the Device Control Plus installation directory (/DeviceControlPlus_Server) to avoid any data loss during the upgrade process.
    • If you have installed Device Control Plus Server on Windows Vista, Windows 7, Windows 2008, Windows 8, Windows 2012 or Windows 2012 R2 you should login as a default administrator before running the Update Manager tool.
    • Ensure that either your Device Control Plus installation directory or the Device Control Plus Directory folder in the system on which the Device Control Plus database is running is not scanned by the anti virus.
    • If the Device Control Plus Service is being monitored by a 3rd party tool or a script that will restart the service, ensure that you disable it until you complete the upgrade process.
  3. Execute the UpdateManager.bat file present in the /DeviceControlPlus_Server/bin directory.
  4. Click "Browse" and select the.ppm file that you have downloaded.
  5. Click "Install" to install the service pack. This may take few minutes depending on the amount of data that needs to be migrated.
  6. Wait until the service pack / hotfix is fully installed.
  7. Click "Close" and then click "Exit" to exit the Update Manager tool.
  8. Start the Device Control Plus.

Application Control Plus Build Number: 11.3.2406.08

Eligible Build Numbers: 11.2.2300.01 and above.

Customers using builds 11.2.2300.01 and above can install this Service Pack. Customers using builds less than 11.2.2300.01 will have to refer to Service Packs page for upgrading to 11.3.2406.08.

Download Hotfix Download ApplicationControlPlus.exe

The SHA256 checksum hash value

  • PPM file
  • 26386225e21d8e1cd507baba2dcbd3d0d1d8f92eea6fbd00cf3c27a70e5840da

Read and accept the License Agreement before downloading this software.

More Download Options  
Mirror Dexe

Instructions to Apply Service Packs/Hot Fixes

  1. Shut down Application Control Plus i.e. right click the Application Control Plus logo on the Notification area of Task bar and click on Stop service
  2. Important:
    • Take a backup of the Application Control Plus installation directory (/ApplicationControlPlus) to avoid any data loss during the upgrade process.
    • If you have installed Application Control Plus Server on Windows 2008, Windows 8, Windows 2012 or Windows 2012 R2 you should login as a default administrator before running the Update Manager tool.
    • Ensure that either your Application Control Plus installation directory or the Application Control Plus Directory folder in the system on which the Application Control Plus database is running is not scanned by the anti virus.
    • If the Application Control Plus Service is being monitored by a 3rd party tool or a script that will restart the service, ensure that you disable it until you complete the upgrade process.
  3. Execute the UpdateManager.bat file present in the /ApplicationControlPlus/bin directory.
  4. Click "Browse" and select the.ppm file that you have downloaded.
  5. Click "Install" to install the service pack. This may take few minutes depending on the amount of data that needs to be migrated.
  6. Wait until the service pack / hotfix is fully installed.
  7. Click "Close" and then click "Exit" to exit the Update Manager tool.
  8. Start the Application Control Plus.

Endpoint DLP Plus Build Number: 11.3.2406.08

Customers using builds 11.2.2300.01 and above can install this Service Pack. Customers using builds less than 11.2.2300.01 will have to refer to Service Packs page for upgrading to 11.3.2406.08

Download Hotfix Download EndpointDLPPlus.exe

The SHA256 checksum hash value

  • PPM file
  • 4c09dca26477b762650ee4ec67b5785ac834b0a462b1436faa926a9a1d6baf79

Read and accept the License Agreement before downloading this software.

More Download Options  
Mirror Download64 bit.exe

Instructions to Apply Service Packs/Hot Fixes

  1. Stop Endpoint DLP Plus. Open services.msc --> Find ManageEngine Endpoint DLP Plus Server --> Stop the service.
  2. Follow this step if you are using build number xx or above. After stopping the Endpoint DLP Plus Secondary Server, Execute "SecondaryServerPPMHandler.bat" present in secondary server.
  3. Execute the UpdateManager.bat file present in the /bin directory. If you have installed Endpoint DLP Plus Server on Windows Vista, Windows 7, Windows 2008, Windows 8, or Windows 2012, you should login as a default administrator before running the Update Manager tool.
  4. Click "Browse" and select the.ppm file that you have downloaded and install the file. This may take few minutes depending on the amount of data that needs to be migrated. Wait until the service pack / hotfix is fully installed.
  5. Close and exit the Update Manager tool.
  6. Start Endpoint DLP Plus.

F